Pattern Generators : Anritsu MP1763C

Este producto es Reconstrudio

Anritsu MP1763C
Ampliar imagen de Anritsu MP1763C

Llame al 1-800-615-8378 para más información

Request a Quote

Equipo de Calidad - nuevas y reformadas

Anritsu MP1763C Pulse Pattern Generator
Used with the Anritsu MP1763C or MP1764D Error Detector for 12.5G BER testing. The amplitude of the clock and data signals can be varied from 0.25 to 2 Vp-p. The offset can be adjusted to within 2 V so that the amplitude and the offset margin can be measured.Variable delay function clock so time dependent characteristics or phase margins of the input clock and data can be measured. An M-series pseudorandom pattern representative of actual conditions or a programmable pattern can be selected as cell data.

1/8 parallel output with options available for either 1/4 parallel output or 1/4 differential output. This is a 12.5G BERT system with differential inputs and differential outputs required for SAN market device applications.

A 3.5 inch floppy disk drive is built in for storing preset data. GPIB function is provided, enabling automatic or remote measurement via an external controller.


* High quality waveform
* Wide frequency range covers STM 0/STS1 to 10 GbE, STM64/STS192, OUT-2, and 4.25G Fibre Channel
* Low FM/PM-noise clock generator
* Differential inputs
* 1/8 parallel output standard, with available options for either 1/4 parallel output or 1/4 differential output
* 8 Mbit programmable pattern corresponding to six frames of STM-64/ STS-192
* Complementary outputs for both data and clock
* Settable amplitudes and offsets for all 8 data outputs with 1/8 speed of the fundamental clock signal
  • Fabricantes: Anritsu
  • Modelo: MP1763C




Please Enter the following Verification Number and then click Send