Broadband Amplifiers : Amplifier Research 10W1000C

Este producto es Reconstrudio

Amplifier Research 10W1000C
Ampliar imagen de Amplifier Research 10W1000C

Llame al 1-800-615-8378 para más información

Request a Quote

Test Equipment Connection tiene el inventario más grande en el Mundo


10 Watt CW, 500 kHz - 1000 MHz (w/ DCP, IEEE & RS-232 interfaces)

The Model 10W1000C is a portable, self-contained, air-cooled, broadband, solid state amplifier designed for applications where instantaneous bandwidth and high gain are required. Push-pull circuitry is utilized in the high power stages to lower distortion and improve stability. The 10W1000C, when used with an RF sweep generator, will provide a minimum of 10 watts of swept power. Included is a front panel gain control which permits the operator to conveniently set the desired output level. The 10W1000C is protected from RF input overdrive by limiting diodes and an RF input leveling circuit which controls the RF input level to the RF amplifier first stage when the RF input level is increased above 0 dBm. The RF Amplifier stages are protected from over temperature by removing the DC voltage to them if an over temperature condition occurs due to cooling blockage or fan failure. There is a digital display on the front panel to indicate the operate status and fault conditions when an over temperature, power supply, or amplifier fault has occurred. The unit can be returned to operate when the condition has been cleared. The 10W1000C includes digital control for both local and remote control of the amplifier. This 8-bit RISC microprocessor controlled board provides both IEEE-488 232 control of all amplifier functions.
  • Fabricantes: Amplifier Research
  • Modelo: 10W1000C

 *
 *

 *


*








Please Enter the following Verification Number and then click Send